This cylindrical, 1.89″ x 0.98″ x 0.98″ gearmotor uses a motor with extra-strong magnets and a 4.4:1 metal gearbox to deliver a lot of power in a relatively small package. This unit has a 0.315″-long, 4 mm-diameter D-shaped output shaft.
Key specs at 6 V: 2220 RPM and 450 mA free-run, 8 oz-in (0.58 kg-cm) and 6 A stall.
This motor is intended for use at 6 V. In general, this kind of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 – 9 V range, though they can begin rotating at voltages as low as 1 V. Higher voltages could start negatively affecting the life of the motor.
Metal Gearmotor Comparison Table
| Gear Ratio | No-Load Speed @ 6 V |
Stall Torque @ 6 V |
Stall Current @ 6 V |
With Encoder |
Without Encoder |
|---|---|---|---|---|---|
| 1:1 | 9800 RPM | 2 oz-in | 6 A | motor without gearbox | |
| 5600 RPM | 1 oz-in | 2.2 A | motor without gearbox | ||
| 4.4:1 | 2220 RPM | 8 oz-in | 6 A | 25Dx48L mm HP | |
| 1280 RPM | 5 oz-in | 2.2 A | 25Dx48L mm | ||
| 9.7:1 | 1010 RPM | 17 oz-in | 6 A | 25Dx48L mm HP | 25Dx48L mm HP |
| 580 RPM | 11 oz-in | 2.2 A | 25Dx48L mm | 25Dx48L mm | |
| 20.4:1 | 480 RPM | 36 oz-in | 6 A | 25Dx50L mm HP | |
| 275 RPM | 24 oz-in | 2.2 A | 25Dx50L mm | ||
| 34:1 | 285 RPM | 60 oz-in | 6 A | 25Dx52L mm HP | 25Dx52L mm HP |
| 165 RPM | 40 oz-in | 2.2 A | 25Dx52L mm | 25Dx52L mm | |
| 47:1 | 210 RPM | 80 oz-in | 6 A | 25Dx52L mm HP | 25Dx52L mm HP |
| 120 RPM | 50 oz-in | 2.2 A | 25Dx52L mm | 25Dx52L mm | |
| 75:1 | 130 RPM | 130 oz-in | 6 A | 25Dx54L mm HP | 25Dx54L mm HP |
| 75 RPM | 85 oz-in | 2.2 A | 25Dx54L mm | 25Dx54L mm | |
| 99:1 | 100 RPM | 160 oz-in | 6 A | 25Dx54L mm HP | |
| 57 RPM | 110 oz-in | 2.2 A | 25Dx54L mm | ||
| 172:1 | 57 RPM | 260 oz-in | 6 A | 25Dx56L mm HP | |
| 33 RPM | 170 oz-in | 2.2 A | 25Dx56L mm | 25Dx56L mm | |
| 227:1 | 25 RPM | 220 oz-in | 2.2 A | 25Dx56L mm | |
| 378:1 | 15 RPM | 250 oz-in | 2.2 A | 25Dx58L mm | |
| 499:1 | 12 RPM | 300 oz-in | 2.2 A | 25Dx58L mm |
Fast Shipping & Professional Packing
We offer a broad range of shipping options owing to our long-running partnerships with UPS, FedEx and DHL. Our warehouse personnel are expertly trained and will wrap your items according to our exact and precise specifications. Your products will be subjected to an exhaustive examination before they will be properly packaged prior to being delivered. Everyday, we send to thousands of clients in multiple countries. This shows our commitment to be the largest online retailer in the world. We have distribution centers as well as warehouses in Europe as well as the USA.
Note: Orders that contain more than one product will be assigned a distinct processing time dependent on the particular item.
We will inspect each and every one of the products before they are shipped. The majority of orders are shipped within 48 hours. The delivery time will be between 3-7 working days.
Returns
The inventory is always changing, and not fully managed by us because of the involvement of many parties including the factory and our warehouse. The stock can change at any moment. Please be aware that it's possible for your order to be out of stock after you have made the order.
Our policy is valid for a period of 30 days. If 30 days have passed in the past since you purchased and we are unable to offer you a return or exchange.
To be eligible for a refund, your product must be unopened and in the same condition as you received it in. It must also be returned in its original packaging.
Related products
Power and Battery
Power and Battery
Component
Component
Motion and Actuation
16-Channel 12-bit PWM/Servo Driver using I2C interface (PCA9685) Canada Robotix
